P-26LAM14

Lumber-Tech Columns 3 Ply Laminated Column with Treated Base & 2' Centernotch
Laminated Columns
MPN: P-26LAM14 P-26LAM14

Out Of Stock

Lumber-Tech Columns 3 Ply Laminated Column with Treated Base & 2' Centernotch
  • Brand: Lumber-Tech Columns
  • Grade: #1
  • Made in US: Yes
  • Manufacturer: Lumber Tech Columns Inc
  • Material: Softwoods
  • Moisture content: .60 KDAT (minimum 6')
  • Species: Southern Yellow Pine

Lumber Tech Columns, Inc., is dedicated to making sure your building is structurally sound with its laminated 3-ply columns.

Manufactured straight and planed on one edge to ensure a consistently flat surface for finishing the interior of the building, each Lumber Tech Column is an engineered product made with new state-of-the-art technology.

The column is composed of #1 SYP on the upper end, and a minimum of 6' of #1 SYP .60 KDAT, therefore making each base virtually treated all the way through.

Adhesive is used between each ply to eliminate interior slippage. Along with ringshank hot dipped galvanized nails placed strategically, this system results in a more rigid column.

The butt joint is finger-jointed to ensure stability of the column. This will allow the columns to bear heavier, vertical loads.

  • Upper 24" is free of fasteners and adhesives
  • Center ply has a 2' section in a saddle that has one screw to stop any warpage at the top of the column, making marking grade and setting trusses easier for workers on the job site
  • Each ply treated before lamination, making each column virtually treated all the way through
  • Planed on one edge to provide a clean, flat interior surface, for a finished look
  • Treated lumber is backed by a Lifetime Limited Warranty
    • Size
    Length