P-PWLVL1555E16

PWT LVL 1.6E 2250Fb 1-1/2" x 5-1/2"
LVL
MPN: P-PWLVL1555E16 P-PWLVL1555E16

Out Of Stock

PWT LVL 1.6E 2250Fb 1-1/2" x 5-1/2"
  • Brand: PWT
  • E-value: 1.6E
  • Made in US: Yes
  • Manufacturer: Pacific Woodtech Corporation
  • Material: LVL
  • Project: LVL Beams

PWT Laminated Veneer Lumber (LVL) beams are exceptionally strong, solid and straight, making them excellent for most primary load-carrying beam applications.

This LVL is made from ultrasonically and visually graded veneers that are arranged in a specific pattern to maximize the strength and stiffness of the veneers and to disperse the naturally occurring characteristics of wood, such as knots, that can weaken a sawn lumber beam. The veneers are then bonded with waterproof adhesives under pressure and heat.

LVL is a vast improvement over traditional lumber for many applications. Problems that naturally occur as sawn lumber dries, including twisting, splitting, checking, crowning, and warping, are greatly reduced.

This 1-1/2" thickness 1.6E 2250Fb LVL is available in a range of depths and lengths. A water resistant coating called SiteCote is applied for extra weather protection during construction.

  • 1-1/2" x 5-1/2" LVL Beam
  • Modulus of elasticity 1.6E
  • Consistent, accurate sizes and resists warping, twisting and shrinking
  • Designed for dry-use conditions where moisture content in service is less than 16%
  • SiteCote water-resistant coating provides protection during construction
    • Length