VV

Uni-Vent III
Venting
MPN: VV VV

Uni-Vent III

Uni-Vent III-DT will conform to virtually any roof panel configuration. It compresses and fills every void between your ridge cap and the roof panel.

Factory applied glue strips allow the installer to roll out Uni-Vent III-DT. Applied to Ridge Cap on the ground with a dual strip 1/4" in from each edge, then installed onto the ridge.

  • One product can match any roof panel configuration
  • Apply directly to ridge cap: use any manufacturer's ridge cap
  • Use on any roof pitch from 2/12 to 20/12
  • UV Stabilized/Fire retardent
  • Continuous double glue strip